• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Make Parts Fast

Make Parts Fast provides news and information about 3D printing, digital manufacturing, prototype parts and rapid manufacturing.

  • Industries
    • Aerospace
    • Architecture
    • Automotive
    • Consumer Products
    • Industrial
    • Medical
  • Additive Technologies
    • Binder Jetting
    • Directed Energy Deposition
    • Extrusion
    • FAQs
    • Material Jetting
    • Powder Bed Fusion
    • Sheet Lamination
  • Service Bureaus
    • Service Bureau News
    • Prototype Parts by Protolabs
    • Xcentric Mold & Engineering
  • Leslie’s blog
  • Videos
  • Podcasts
  • Women in Engineering

Industries

Look at what micro 3D printing can make

November 20, 2020 By Leslie Langnau Leave a Comment

Micro 3D printing technology innovator Nanofabrica released information recently about produced parts that illustrate the precision and tolerances achievable through the use of its Tera 250 AM system. Existing at the interface of 3D printing for … [Read more...] about Look at what micro 3D printing can make

Filed Under: Additive Manufacturing, Aerospace, Extrusion, Industries, Medical, News, Rapid MFG, Rapid Prototyping Tagged With: nanofabrica

Prodways announces ProMaker P1000X

November 18, 2020 By Leslie Langnau Leave a Comment

At the FormNext virtual trade show held from November 10 to 12, 2020, Prodways, part of Prodways Group, specialist in digital design and additive manufacturing, announced the availability of its ProMaker P1000X 3D printing machine, noting its … [Read more...] about Prodways announces ProMaker P1000X

Filed Under: 3D Printers, Industries, News Tagged With: prodways

METHOD X 3D printers used for end-use part production in the 2020 NASCAR Cup Series season

November 17, 2020 By Leslie Langnau Leave a Comment

“Advancing additive manufacturing is something I’ve been a proponent of for the past few years. I believe it will change how we fundamentally manufacture in our sport,” said Michael Leavine, vice president of Leavine Family Racing. Leavine Family … [Read more...] about METHOD X 3D printers used for end-use part production in the 2020 NASCAR Cup Series season

Filed Under: 3D Printers, Automotive, Extrusion Tagged With: MakerBot

The KING Supersport-35 limited edition, fully 3D printed putter with SIK Face Technology, delivers the next level in putter performance

November 17, 2020 By Leslie Langnau Leave a Comment

3D printing is not all about aerospace, medical and industrial application. Occasionally, there’s the fun side of 3D printing; like golf. COBRA Golf, a leader in golf club innovation, used 3D Printing technology on its KING Supersport-35 putter. … [Read more...] about The KING Supersport-35 limited edition, fully 3D printed putter with SIK Face Technology, delivers the next level in putter performance

Filed Under: Binder Jetting, Consumer Products, Entertainment Tagged With: hpinc.

FDA approves patient-specific total ankle surgical planning and 3D printed instruments

November 17, 2020 By Leslie Langnau Leave a Comment

3D Systems announced the Food and Drug Administration (FDA) has provided 510(k) clearance for the Vantage Ankle PSI - its patient-specific total ankle surgical planning and 3D printed instruments. The product includes pre-surgical planning and a … [Read more...] about FDA approves patient-specific total ankle surgical planning and 3D printed instruments

Filed Under: Materials, Medical Tagged With: 3dSystems

Siemens expands software ecosystem for industrial additive manufacturing

November 12, 2020 By Leslie Langnau Leave a Comment

Siemens Digital Industries Software is expanding its ecosystem for industrial additive manufacturing (AM) through partnerships with Morf3D, Sintavia and Evolve Additive Solutions. Through these new partnerships, Siemens is adding support for new … [Read more...] about Siemens expands software ecosystem for industrial additive manufacturing

Filed Under: Industrial, News, Software Tagged With: siemensdigitalindustriessoftware

Mimaki introduces compact full-color UV inkjet 3D printer

November 10, 2020 By Leslie Langnau Leave a Comment

Mimaki Europe, in conjunction with Mimaki USA, a leading manufacturer of inkjet printers and cutting systems, announces the launch of its new compact, full-color 3DUJ-2207 UV Inkjet 3D Printer. The 3DUJ-553, Mimaki combines the same color range and … [Read more...] about Mimaki introduces compact full-color UV inkjet 3D printer

Filed Under: 3D Printers, Industries, Material Jetting Tagged With: mimaki

3D printing pellet material suits automotive tooling applications

November 10, 2020 By Leslie Langnau Leave a Comment

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, announced the introduction of EcoPaXX AM4001 GF (G), a material for fused granulate fabrication or 3D pellet printing. The 3D printing version is a fit-for-purpose … [Read more...] about 3D printing pellet material suits automotive tooling applications

Filed Under: Automotive, Materials Tagged With: royaldsm

Materialise obtains CE Marking certification for multiple personalized medical devices

November 10, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a leading company in 3D technology solutions in the industrial and medical markets, announces it obtained the CE Marking Certification for most of its personalized orthopedic and craniomaxillofacial (CMF) solutions. This includes … [Read more...] about Materialise obtains CE Marking certification for multiple personalized medical devices

Filed Under: Medical, News Tagged With: Materialise

Essentium introduces anti-static material for applications in the aerospace and defense industries

November 9, 2020 By Leslie Langnau Leave a Comment

Essentium, Inc. introduced Essentium TPU 58D-AS, an electrostatic discharge (ESD) safe and anti-static thermoplastic polyurethane filament available in color. Unlike other ESD-safe materials, which are only offered in black due to carbon additives, … [Read more...] about Essentium introduces anti-static material for applications in the aerospace and defense industries

Filed Under: Aerospace, Materials Tagged With: essentium

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Go to page 5
  • Interim pages omitted …
  • Go to page 176
  • Go to Next Page »

Primary Sidebar

Make Parts Fast Additive Handbook

3D Printing Design Guide – Download

Design World Digital Editions

Design World Digital Edition

Browse the most current issue of Design World and back issues in an easy to use high quality format. Clip, share and download with the leading design engineering magazine today.

Tweets by @DW_3DPrinting

Footer

Make Parts Fast Digital Network

Videos
Podcasts
Leadership in Engineering

Make Parts Fast

Subscribe to our newsletter
Subscribe to Make Parts Fast
Advertise with us
About
Contact Us
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on InstagramAdd us on YouTube

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy