• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Make Parts Fast

Make Parts Fast provides news and information about 3D printing, digital manufacturing, prototype parts and rapid manufacturing.

  • Industries
    • Aerospace
    • Architecture
    • Automotive
    • Consumer Products
    • Industrial
    • Medical
  • Additive Technologies
    • Binder Jetting
    • Directed Energy Deposition
    • Extrusion
    • FAQs
    • Material Jetting
    • Powder Bed Fusion
    • Sheet Lamination
  • Service Bureaus
    • Service Bureau News
    • Prototype Parts by Protolabs
    • Xcentric Mold & Engineering
  • Leslie’s blog
  • Videos
  • Podcasts
  • Women in Engineering

Materialise

Interactive VR models complement 3D printing

December 4, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a global leader in medical 3D printing software and services, introduced its Mimics VR Viewer at the RSNA Annual Meeting, bringing virtual reality (VR) capabilities to its popular 3D modeling platform. Medical research in VR … [Read more...] about Interactive VR models complement 3D printing

Filed Under: 3D printing ancillary equipment Tagged With: Materialise

3DP software supports demand for personalized medical devices

December 2, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a global leader in 3D printing solutions, has released SurgiCase software, an online case management system (CMS) for personalized medical devices. The SurgiCase software, will give medical device companies and clinicians a single … [Read more...] about 3DP software supports demand for personalized medical devices

Filed Under: Software Tagged With: Materialise

Bluesint PA12 makes it possible to 3D print with up to 100% re-used powder

November 18, 2020 By Leslie Langnau Leave a Comment

Materialise announces Bluesint PA12, a material innovation that makes it possible to 3D print with up to 100% re-used powder. 3D printing is often considered a sustainable manufacturing technology but a new Lifecycle Analysis indicates that for large … [Read more...] about Bluesint PA12 makes it possible to 3D print with up to 100% re-used powder

Filed Under: Materials Tagged With: Materialise

Materialise obtains CE Marking certification for multiple personalized medical devices

November 10, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a leading company in 3D technology solutions in the industrial and medical markets, announces it obtained the CE Marking Certification for most of its personalized orthopedic and craniomaxillofacial (CMF) solutions. This includes … [Read more...] about Materialise obtains CE Marking certification for multiple personalized medical devices

Filed Under: Medical, News Tagged With: Materialise

Materialise introduces Build Processor Support for Desktop Metal binder jetting systems

November 10, 2020 By Leslie Langnau Leave a Comment

Materialise announced support for Desktop Metal Binder Jetting technologies, including Desktop Metal’s Shop System and Production System platforms. This strategic partnership will help reduce the complexity for companies looking to scale their 3D … [Read more...] about Materialise introduces Build Processor Support for Desktop Metal binder jetting systems

Filed Under: News, Software Tagged With: desktopmetal, Materialise

Materialise announces strategic investment in Ditto

September 22, 2020 By WTWH Editor Leave a Comment

Materialise NV, a global leader in 3D printing solutions, announced that it has made a strategic investment in Ditto, a developer of virtual eyewear try-on platforms. In addition, the two companies will collaborate to advance the digital … [Read more...] about Materialise announces strategic investment in Ditto

Filed Under: News Tagged With: Materialise

Materialise launches Mindware, advisory service for 3D Printing

May 20, 2020 By Leslie Langnau Leave a Comment

Materialise, a global leader in 3D printing, is launching Mindware as an advisory service to offer businesses strategic, tailored and technology-neutral insights on the use of 3D printing to address their business challenges. Business leaders … [Read more...] about Materialise launches Mindware, advisory service for 3D Printing

Filed Under: Additive Manufacturing, Industries, Software Tagged With: Materialise

Materialise develops a novel solution for the ventilator shortage

April 6, 2020 By Leslie Langnau Leave a Comment

In response to the shortage of mechanical ventilators during this pandemic, Materialise, a Belgium-based pioneer in 3D printing, has developed the Materialise NIP Connector, a device to convert standard equipment available in most hospitals, into a … [Read more...] about Materialise develops a novel solution for the ventilator shortage

Filed Under: Additive Manufacturing, Medical, News Tagged With: Materialise

3D printed door handle developed in effort to reduce spread of Coronavirus

March 16, 2020 By Leslie Langnau Leave a Comment

3D printing technology may lend a hand in preventing the spread of the Coronavirus. Materialise, a Belgium-based pioneer in 3D printing, has designed a 3D printed door opener that makes it possible to open and close doors with your arm, removing the … [Read more...] about 3D printed door handle developed in effort to reduce spread of Coronavirus

Filed Under: Featured, News Tagged With: Materialise

New release of Magics improves productivity

November 20, 2019 By wpengine Leave a Comment

Materialise announces 3D printing solutions and initiatives that will increase productivity and advance serial additive manufacturing. A new release of Materialise Magics introduces several features to shorten the build preparation process, allowing … [Read more...] about New release of Magics improves productivity

Filed Under: News Tagged With: Materialise

  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Go to Next Page »

Primary Sidebar

Make Parts Fast Additive Handbook

3D Printing Design Guide – Download

Design World Digital Editions

Design World Digital Edition

Browse the most current issue of Design World and back issues in an easy to use high quality format. Clip, share and download with the leading design engineering magazine today.

Tweets by @DW_3DPrinting

Footer

Make Parts Fast Digital Network

Videos
Podcasts
Leadership in Engineering

Make Parts Fast

Subscribe to our newsletter
Subscribe to Make Parts Fast
Advertise with us
About
Contact Us
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on InstagramAdd us on YouTube

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy