• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Make Parts Fast

Make Parts Fast provides news and information about 3D printing, digital manufacturing, prototype parts and rapid manufacturing.

  • Industries
    • Aerospace
    • Architecture
    • Automotive
    • Consumer Products
    • Industrial
    • Medical
  • Additive Technologies
    • Binder Jetting
    • Directed Energy Deposition
    • Extrusion
    • FAQs
    • Material Jetting
    • Powder Bed Fusion
    • Sheet Lamination
  • Service Bureaus
    • Service Bureau News
    • Prototype Parts by Protolabs
    • Xcentric Mold & Engineering
  • Leslie’s blog
  • Videos
  • Podcasts
  • Women in Engineering

Materialise

Materialise new 3D Printing service is eco-friendly, using up to 100% re-used powder

June 29, 2021 By Leslie Langnau Leave a Comment

Materialise, a global leader in 3D printing solutions, introduced a new service for more sustainable 3D printing. The company’s Bluesint PA 12 service makes it possible to 3D print with up to 100% re-used powder, reducing powder waste and offering … [Read more...] about Materialise new 3D Printing service is eco-friendly, using up to 100% re-used powder

Filed Under: Materials, News, Powder Bed Fusion Tagged With: Materialise

Materialise and EOS supply PA-FR parts as Airbus onboards

May 27, 2021 By Leslie Langnau Leave a Comment

Materialise announced the qualification by Airbus to manufacture flight-ready parts using laser sintering technology. The material used in the process, produced by EOS, is a flame-retardant polyamide (PA 2241 FR). With this development, … [Read more...] about Materialise and EOS supply PA-FR parts as Airbus onboards

Filed Under: Aerospace, Materials, Powder Bed Fusion Tagged With: Materialise

Materialise opens new facility in Germany

April 21, 2021 By WTWH Editor Leave a Comment

Materialise, a global leader in 3D printing solutions, has opened its new 3,500 square meter Metal Competence Center for 3D printing in Bremen, Germany. The company invested approximately €7.5 million to construct the new facility, which has the … [Read more...] about Materialise opens new facility in Germany

Filed Under: News Tagged With: Materialise

Materialise acquires option to buy Link3D

April 13, 2021 By WTWH Editor Leave a Comment

Materialise, a global leader in 3D printing solutions, acquired an option to buy Link3D Inc., an additive workflow and manufacturing execution systems (MES) company. The acquisition will extend Materialise’s ability to help companies gain control of … [Read more...] about Materialise acquires option to buy Link3D

Filed Under: News Tagged With: link3d, Materialise

Materialise’s 3D printing and surgical planning tools support world’s first successful double hand and face transplant

February 3, 2021 By Leslie Langnau Leave a Comment

3D technologies, developed by Materialise, played a crucial role in the world’s first simultaneous double hand and face transplant that was successfully performed at NYU Langone Health in Manhattan, NY. Materialise’s innovative 3D planning and … [Read more...] about Materialise’s 3D printing and surgical planning tools support world’s first successful double hand and face transplant

Filed Under: Medical, News Tagged With: Materialise

Interactive VR models complement 3D printing

December 4, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a global leader in medical 3D printing software and services, introduced its Mimics VR Viewer at the RSNA Annual Meeting, bringing virtual reality (VR) capabilities to its popular 3D modeling platform. Medical research in VR … [Read more...] about Interactive VR models complement 3D printing

Filed Under: 3D printing ancillary equipment Tagged With: Materialise

3DP software supports demand for personalized medical devices

December 2, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a global leader in 3D printing solutions, has released SurgiCase software, an online case management system (CMS) for personalized medical devices. The SurgiCase software, will give medical device companies and clinicians a single … [Read more...] about 3DP software supports demand for personalized medical devices

Filed Under: Software Tagged With: Materialise

Bluesint PA12 makes it possible to 3D print with up to 100% re-used powder

November 18, 2020 By Leslie Langnau Leave a Comment

Materialise announces Bluesint PA12, a material innovation that makes it possible to 3D print with up to 100% re-used powder. 3D printing is often considered a sustainable manufacturing technology but a new Lifecycle Analysis indicates that for large … [Read more...] about Bluesint PA12 makes it possible to 3D print with up to 100% re-used powder

Filed Under: Materials Tagged With: Materialise

Materialise obtains CE Marking certification for multiple personalized medical devices

November 10, 2020 By Leslie Langnau Leave a Comment

Materialise NV, a leading company in 3D technology solutions in the industrial and medical markets, announces it obtained the CE Marking Certification for most of its personalized orthopedic and craniomaxillofacial (CMF) solutions. This includes … [Read more...] about Materialise obtains CE Marking certification for multiple personalized medical devices

Filed Under: Medical, News Tagged With: Materialise

Materialise introduces Build Processor Support for Desktop Metal binder jetting systems

November 10, 2020 By Leslie Langnau Leave a Comment

Materialise announced support for Desktop Metal Binder Jetting technologies, including Desktop Metal’s Shop System and Production System platforms. This strategic partnership will help reduce the complexity for companies looking to scale their 3D … [Read more...] about Materialise introduces Build Processor Support for Desktop Metal binder jetting systems

Filed Under: News, Software Tagged With: desktopmetal, Materialise

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Interim pages omitted …
  • Go to page 6
  • Go to Next Page »

Primary Sidebar

Make Parts Fast Additive Handbook

Additive Manufacturing Design Guide – Download

Design World Digital Editions

Design World Digital Edition

Browse the most current issue of Design World and back issues in an easy to use high quality format. Clip, share and download with the leading design engineering magazine today.

Managing Editor, Leslie Langnau

Leslie Langnau

Leslie Langnau is the Managing Editor of the Design World Network. She also has more than 20 years experience as a technology editor, covering such areas as controls, mechanics, mechatronics, couplings, industrial networks, and the field now known as additive manufacturing (formerly rapid prototyping).

Footer

Make Parts Fast Digital Network

Videos
Podcasts
Leadership in Engineering
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on InstagramAdd us on YouTube

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy