• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Make Parts Fast

Make Parts Fast provides news and information about 3D printing, digital manufacturing, prototype parts and rapid manufacturing.

  • Industries
    • Aerospace
    • Architecture
    • Automotive
    • Consumer Products
    • Industrial
    • Medical
  • Additive Technologies
    • Binder Jetting
    • Directed Energy Deposition
    • Extrusion
    • FAQs
    • Material Jetting
    • Powder Bed Fusion
    • Sheet Lamination
  • Service Bureaus
    • Service Bureau News
    • Prototype Parts by Protolabs
    • Xcentric Mold & Engineering
  • Leslie’s blog
  • Videos
  • Podcasts
  • Women in Engineering

Stratasys

The 3D printer home market takes shape

January 10, 2012 By Leslie Langnau Leave a Comment

3D printer for home market

It looks like the big players in the additive manufacturing market are taking the potential of the 3D printing home market seriously with the introduction of a new 3D printer from 3D Systems specifically geared to the home market, and rumors of a … [Read more...] about The 3D printer home market takes shape

Filed Under: 3D Printers, Consumer Products, Featured, Leslie's blog, Personal 3D printers, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, 3D Systems, additive manufacturing, direct digital manufacturing, rapid prototyping, Stratasys

3D printing’s stellar, amazing year

December 25, 2011 By Leslie Langnau 2 Comments

3d Printing goes into space

What a year 3D printing technology had in 2011! This approximately 25 year-old industry is enjoying a second round of “good buzz” thanks in large part to what have been labeled personal sized, hobby, or Maker units and the media fascination … [Read more...] about 3D printing’s stellar, amazing year

Filed Under: 3D Printers, Additive Manufacturing, Aerospace, Consumer Products, Entertainment, Featured, Industrial, Leslie's blog, Medical, News, Personal 3D printers, Rapid MFG, Rapid Prototyping, SLA, SLS Tagged With: 3D Printing, 3D Systems, additive manufacturing, direct digital manufacturing, Fused deposition modeling, Objet Geometries, Quickparts, Selective laser sintering (SLS), SLA, Stratasys, ZCorporation

Lights, Camera, 3D Print!

December 5, 2011 By Leslie Langnau Leave a Comment

Stratasys Dimension printer used to build models for short fim.

A Dimension 3D Printer from Stratasys Inc. plays a supporting role in this entertainment application. I have not seen the original animated short, “Back To The Start,” that has been viewed more than 2 million times on YouTube and is touted as one of … [Read more...] about Lights, Camera, 3D Print!

Filed Under: 3D Printers, Additive Manufacturing, Entertainment, Featured, Leslie's blog, News, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, additive manufacturing, rapid prototyping, Stratasys

In-house Prototyping Helps Auto Vendor Go to Final Design Faster

December 5, 2011 By Leslie Langnau Leave a Comment

Koenigsegg-car

By Chris Hoins, Controller, Stratasys, Inc. In-house prototyping versus outsourcing-here's one company's choice and why. Manufacturing and assembling each of the components of a Koenigsegg car is labor intensive as more than 300 carbon fiber … [Read more...] about In-house Prototyping Helps Auto Vendor Go to Final Design Faster

Filed Under: 3D Printers, Additive Manufacturing, Automotive, Equipment, FDM, Featured, News, Processes, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, additive manufacturing, direct digital manufacturing, rapid prototyping, Stratasys

Service providers purchases are good news for AM industry

December 5, 2011 By Leslie Langnau Leave a Comment

Stratasys FDM Machine for 3D printing

A good sign for the Additive Manufacturing (AM) industry is the number of prototype service providers reporting purchases of new equipment and materials. It looks like more engineers are turning to prototyping, whether it’s in house or … [Read more...] about Service providers purchases are good news for AM industry

Filed Under: 3D Printers, Aerospace, Automotive, FDM, Rapid MFG, Rapid Prototyping, Service Bureau News Tagged With: 3D Printing, additive manufacturing, direct digital manufacturing, Fused deposition modeling, rapid prototyping, Stratasys

Stratasys eases support material removal for polycarbonate

November 29, 2011 By Leslie Langnau Leave a Comment

Stratasys removal material for 3D printing

Stratasys (NASDAQ: SSYS) says it will expand its WaterWorks soluble support material to be compatible with its polycarbonate 3D printing build material (PC-10) for Fortus 3D Production Systems. WaterWorks soluble support material was available … [Read more...] about Stratasys eases support material removal for polycarbonate

Filed Under: 3D Printers, Additive Manufacturing, FDM, Materials, News, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, additive manufacturing, rapid prototyping, Stratasys

Stratasys expands production capacity

September 29, 2011 By Leslie Langnau Leave a Comment

SSYSFacilityExpansion1

With a ceremonial ribbon-cutting event at its newest building, 3D printer maker, Stratasys (NASDAQ: SSYS), expressed a vote of confidence in an uncertain economy. Stratasys says the 90,000 square-foot building doubles its capacity for machine … [Read more...] about Stratasys expands production capacity

Filed Under: 3D Printers, Aerospace, Architecture, Automotive, Consumer Products, Industrial, Medical, News, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, rapid prototyping, Selective laser sintering (SLS), Stratasys

Stratasys announces eighth annual extreme redesign challenge by Dimension 3D Printing

September 8, 2011 By Leslie Langnau 1 Comment

Stratasys Inc. (NASDAQ: SSYS) announced the launch of its Dimension brand's eighth annual Extreme Redesign 3D Printing Challenge. The global contest encourages students to submit an innovative new product design, a redesign of an existing product, or … [Read more...] about Stratasys announces eighth annual extreme redesign challenge by Dimension 3D Printing

Filed Under: 3D Printers, Additive Manufacturing, Consumer Products, Industrial, Medical, News, Packaging, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, rapid prototyping, Reverse Engineering, Stratasys

National program is the first of its kind to put 3D printers in high school students’ hands

September 4, 2011 By Leslie Langnau 1 Comment

The trend to put Additive Manufacturing (AM) technology into schools continues. Stratasys (NASDAQ: SSYS) announced that it has been chosen by the Georgia Institute of Technology to provide its Dimension 3D Printers to select high schools across the … [Read more...] about National program is the first of its kind to put 3D printers in high school students’ hands

Filed Under: 3D Printers, Aerospace, Automotive, Consumer Products, Industrial, Medical, News, Packaging, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, rapid prototyping, Stratasys

Stratasys releases an Additive Manufacturing material-property study

September 1, 2011 By Leslie Langnau Leave a Comment

stratasys-logo-70

Independent university study evaluates material properties over time for PC and ABS plastic parts produced via Stratasys FDM process Stratasys Inc., (NASDAQ: SSYS) announces findings from an independent and extensive performance study … [Read more...] about Stratasys releases an Additive Manufacturing material-property study

Filed Under: 3D Printers, Aerospace, Automotive, Consumer Products, FDM, Industrial, Materials, Medical, News, Packaging, Rapid MFG, Rapid Prototyping Tagged With: 3D Printing, Fused deposition modeling, rapid prototyping, Stratasys

  • « Go to Previous Page
  • Go to page 1
  • Interim pages omitted …
  • Go to page 9
  • Go to page 10
  • Go to page 11
  • Go to page 12
  • Go to page 13
  • Go to Next Page »

Primary Sidebar

Make Parts Fast Additive Handbook

Additive Manufacturing Design Guide – Download

Design World Digital Editions

Design World Digital Edition

Browse the most current issue of Design World and back issues in an easy to use high quality format. Clip, share and download with the leading design engineering magazine today.

Managing Editor, Leslie Langnau

Leslie Langnau

Leslie Langnau is the Managing Editor of the Design World Network. She also has more than 20 years experience as a technology editor, covering such areas as controls, mechanics, mechatronics, couplings, industrial networks, and the field now known as additive manufacturing (formerly rapid prototyping).

Footer

Make Parts Fast Digital Network

Videos
Podcasts
Leadership in Engineering
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on InstagramAdd us on YouTube

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy