• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Make Parts Fast

Make Parts Fast provides news and information about 3D printing, digital manufacturing, prototype parts and rapid manufacturing.

  • Industries
    • Aerospace
    • Architecture
    • Automotive
    • Consumer Products
    • Industrial
    • Medical
  • Additive Technologies
    • Binder Jetting
    • Directed Energy Deposition
    • Extrusion
    • FAQs
    • Material Jetting
    • Powder Bed Fusion
    • Sheet Lamination
  • Service Bureaus
    • Service Bureau News
    • Prototype Parts by Protolabs
    • Xcentric Mold & Engineering
  • Leslie’s blog
  • Videos
  • Podcasts
  • Women in Engineering

Service Bureau News

Rapid Application Group announces additive manufacturing contract with Metro Aerospace

January 27, 2021 By WTWH Editor Leave a Comment

Rapid Application Group (RAG) announced a manufacturing agreement with Metro Aerospace for the provision of FAA-certified parts using SLS additive manufacturing. Metro Aerospace, based in Dallas TX, delivers innovative Microvanes that reduce drag and … [Read more...] about Rapid Application Group announces additive manufacturing contract with Metro Aerospace

Filed Under: Aerospace, Service Bureau News Tagged With: rapidapplicationgroup

Asiga and Henkel drive additive manufacturing solutions for industrial production

January 27, 2021 By WTWH Editor Leave a Comment

Asiga, an industry leading manufacturer of 3D printing equipment, is partnering in Henkel’s Open Materials Platform to accelerate the adoption of additive manufacturing with production-grade 3D printed parts that are accurate and functional. Henkel … [Read more...] about Asiga and Henkel drive additive manufacturing solutions for industrial production

Filed Under: Service Bureau News Tagged With: Henkel

Trends to watch in additive manufacturing for 2021

December 15, 2020 By Leslie Langnau Leave a Comment

2020 was an eventful year for the additive manufacturing industry that no one predicted. The coronavirus pandemic practically shut down the global supply chain. But these gaps in supply, especially for personal medical protection equipment, were … [Read more...] about Trends to watch in additive manufacturing for 2021

Filed Under: Leslie's blog, Podcasts, Service Bureau News Tagged With: shapeways

Among GoProto’s recent acquisitions is 3D Systems Australian facility

December 7, 2020 By WTWH Editor Leave a Comment

GoProto announced it has acquired 3D Systems’ two-year old Australian facility, located in Melbourne. The state-of-the-art facility houses a full range of 3D Systems production-ready 3D printers and an experienced management and operations … [Read more...] about Among GoProto’s recent acquisitions is 3D Systems Australian facility

Filed Under: Service Bureau News Tagged With: goproto

3D printing parts service features elastomeric Thermoplastic Polyamide for the production of rubber-like parts

October 29, 2020 By Leslie Langnau Leave a Comment

3DElastoPrint is enabled by an elastomeric TPA, co-branded by Evonik and HP -- a flexible, high-performance, thermoplastic elastomer optimized specifically for HP’s Multi Jet Fusion (MJF) 3D printer. Evonik and HP’s TPA material is flexible and … [Read more...] about 3D printing parts service features elastomeric Thermoplastic Polyamide for the production of rubber-like parts

Filed Under: Service Bureau News Tagged With: goproto

3D printing versus traditional manufacturing—it’s not always either/or, says a service provider

October 22, 2020 By Leslie Langnau Leave a Comment

One thing unites the entire manufacturing world, and that is the drive to produce innovative, attractive, useful products in a timely and cost-effective manner. The fact that 3D printing can assist in these endeavors is a given, but the way that that … [Read more...] about 3D printing versus traditional manufacturing—it’s not always either/or, says a service provider

Filed Under: Service Bureau News Tagged With: jellypipe

A better view into overseas part manufacturing

September 1, 2020 By Leslie Langnau Leave a Comment

The pandemic has made it difficult for those who order manufactured parts from overseas to inspect and see the part before delivery. Fictiv offers a solution. Including visibility and traceability features into its Digital Manufacturing Ecosystem … [Read more...] about A better view into overseas part manufacturing

Filed Under: Service Bureau News Tagged With: fictiv

Save on post-processing with automated resin removal solution

July 29, 2020 By WTWH Editor Leave a Comment

PostProcess Technologies Inc., a provider of automated and intelligent post-printing solutions for industrial 3D printing,  announced the adoption of its automated resin removal solution by US-based service bureau Empire Group. Empire is renowned for … [Read more...] about Save on post-processing with automated resin removal solution

Filed Under: 3D printing ancillary equipment, News, Service Bureau News Tagged With: postprocesstechnologies

Xometry launches 2D Technical Drawing Marketplace

July 7, 2020 By WTWH Editor Leave a Comment

Xometry, a U.S. marketplace for custom manufacturing, unveiled its 2D Technical Drawing Marketplace, a platform to expand access to prospective job orders for 3,000+ American machine shops. The 2D Technical Drawing Marketplace lets engineers and … [Read more...] about Xometry launches 2D Technical Drawing Marketplace

Filed Under: Service Bureau News Tagged With: xometry

Fictiv announces agile 3D Printing collaboration with Jabil

July 7, 2020 By Leslie Langnau Leave a Comment

Fictiv announced a collaboration that makes Jabil Inc. a key part of its global manufacturing network to connect and streamline 3D-print prototyping through to mass-scale production using an innovative digital thread. Designed to de-risk and … [Read more...] about Fictiv announces agile 3D Printing collaboration with Jabil

Filed Under: Service Bureau News Tagged With: fictiv

  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Interim pages omitted …
  • Go to page 16
  • Go to Next Page »

Primary Sidebar

Make Parts Fast Additive Handbook

3D Printing Design Guide – Download

Design World Digital Editions

Design World Digital Edition

Browse the most current issue of Design World and back issues in an easy to use high quality format. Clip, share and download with the leading design engineering magazine today.

Tweets by @DW_3DPrinting

Footer

Make Parts Fast Digital Network

Videos
Podcasts
Leadership in Engineering

Make Parts Fast

Subscribe to our newsletter
Subscribe to Make Parts Fast
Advertise with us
About
Contact Us
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on InstagramAdd us on YouTube

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy